Guides / Margin Call vs. Stop Out, Explained

Two broker thresholds, one ratio

Margin call vs. stop out: the mechanical difference.

One is a warning. The other is your broker closing trades without asking. Here's the margin-level math that drives both, and why the two numbers people assume (100% and 50%) aren't universal.

Cephic TeamUpdated Nov 2, 20266 min read

Quick answer: a margin call is a notification that your margin level has dropped below a broker-set threshold, commonly somewhere near 100%, though it varies. A stop out is the broker acting on it: force-closing enough of your open positions, without asking, to pull margin level back above a second, lower threshold, often 50%, though this varies too. Both are read off the same ratio: equity divided by the margin your open positions have locked up.

THE WARNING VS. THE ACTION

A margin call is a notice. A stop out is a forced exit.

A margin call doesn't close anything on its own. It's a message (an email, a platform flag, sometimes just a status change in your terminal) telling you that margin level has fallen below the broker's call threshold. You can usually still trade. You can add funds, close something yourself, or do nothing and wait to see where price goes. Nobody acts on your behalf at this stage.

A stop out is a different event entirely. Once margin level reaches the broker's stop-out threshold, the platform closes positions automatically (typically the one with the largest floating loss first) until margin level is back above that line. You don't get asked, and you don't get a chance to add funds first. Most MT4/MT5 brokers process this within the same price tick that triggers it.

THE MATH BEHIND BOTH

Margin level: the ratio both thresholds are measured against

Both numbers are read off the same ratio. Cephic's margin calculator computes it the same way a broker does:

margin level % = (equity / required margin) × 100

Required margin is what the broker locks up to let you open a position: position value divided by leverage. It's fixed the moment you open the trade and doesn't move again unless you open or close something. Equity is what moves: your balance plus every open position's floating profit or loss, updated continuously. As a trade goes against you, equity falls, required margin stays exactly where it was, and the ratio between the two drops. That's the entire mechanism behind both a margin call and a stop out.

Cephic's calculator flags a margin level of 200% or higher as safe, 100 to 200% as watch, and anything under 100% as critical, which lines up closely with where most brokers set their margin call.

A WORKED EXAMPLE

Watching $5,000 of equity erode on one trade

Take a $5,000 account with one open position that locks up $1,000 of required margin, a $100,000 position at 1:100 leverage, for example. Starting margin level is 500%, comfortably safe. As the trade moves against you and floating loss grows, equity falls and margin level follows it down:

Notice what that means in dollar terms: with a single position using 20% of the account as required margin, the trade has to be down 90% of the account's starting equity before a 50% stop out even triggers. Margin level is based on used margin, not on account balance or on whatever risk budget you set when you opened the trade. It can let a loss run far past where a trader sizing by percent-risk-per-trade would expect to have already closed it.

WHERE PEOPLE MIX THIS UP

This isn't the same as a prop firm's drawdown rule

Margin call and stop out are broker mechanics: calculated from equity and used margin, enforced by the trading platform the instant the ratio crosses a line. A prop firm's drawdown rule (a 5% daily loss limit, say, or a 10% max drawdown from a high-water mark) is a separate contract term, calculated off balance or equity peaks, and enforced by the firm's own monitoring. It has nothing to do with the broker's margin engine.

The gap between the two is usually large. A $100,000 prop firm account with a 10% max drawdown rule gets disabled at $90,000 of equity. That same account, run at modest leverage with modest position sizes, could still be sitting at a 600% margin level when the drawdown rule trips, nowhere near a margin call, let alone a stop out. Checking margin level tells you nothing about whether you've breached a prop firm's rules; the two numbers come from different formulas, enforced by different parties, on different schedules. For how prop firm drawdown rules actually get calculated, see the trailing vs. static drawdown guide below.

WHAT TO DO WITH THIS

Check margin level before it checks you

Look up your specific broker's call and stop-out percentages in the account terms; they aren't universal. 100% and 50% are common defaults, but some brokers call at 150% or stop out at 20%, and thresholds can differ by instrument, with crypto CFDs often stricter than major FX pairs. Whatever the exact numbers, the same lever works regardless: smaller position size relative to account equity means more distance between your current margin level and either threshold. It doesn't change your edge and it doesn't make a losing trade win. It buys you more equity to lose before the platform decides for you instead of you deciding for yourself.

See your own required margin and margin level before you open the next position.

Open the calculator

Related free calculators: Margin Calculator · Leverage Calculator